Monitoring your battery bank is easy with the Battery Monitor Kit (ME-BMK) from Magnum Energy. Acting as a “fuel gauge” for your batteries, the ME-BMK monitors their state of charge (SOC) and then provides this information in an easy-to-understand display via the ME-RC remote. With accurate SOC readings, you can avoid unneccessary battery recharging, saving on fuel and long-term maintenance costs.
If you already have a Magnum Inverter/Charger and Magnum
Remote, the ME-BMK is an easy retrofit. Simply install the kit according to the installation manual and begin monitoring your battery bank via the “Meter” button on your ME-RC.
Part Number: ME-BMK
Works With:
ME Series
MS Series
MS-AE Series
RD Series
Available Readings:
State of Charge (SOC) 0 - 100%
DC volts
DC amps
Amp hours in/out
Resettable amp hours out
Total amp hours out
Minimum volts DC
Maximum volts DC
Temperature compensated
Auto detects input voltage
Specifications:
DC volts: 7 to 70 (±0.5%) auto voltage detection
DC amps: ±0.1 to 999 (±1.0%)
Battery SOC %: 0 to 100% (1% increments)
Power draw: < .6 watts
Amp hours in/out: ±32,768 amp hours (1 AH increments)
Minimum/maximim DC: 7 to 70 VDC, resettable
Shipping weight: 2 lb (.9 kg)
DC Shunt:
Resistance: 0.1 milliohm (500A at 50mV)
Continuous current: 410 amperes maximum
Overload current: Overloads to 500 amps for less than 5 minutes if normally operated
at less than 300 amps
Kit Includes:
Sense module
DC shunt 50mv/500 amp shunt
Twisted pair wire 5’ length, 18 AWG wire
Communication cable 10’ length, 2-conductor, telephone standard
Additional Resources:
Back to Magnum Energy Inverters
Back to All Inverters
