Introducing the ME Series Inverter/Charger from Magnum Energy -- A new generation inverter designed specifically for rugged recreational vehicle use. The ME Series is powerful, easy-to-use, and best of all, cost effective. The ME series is ETL Listed to the stringent requirements of UL/cUL 458, ensuring that the inverter is safe and reliable.

Install the ME series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.

Part Number: ME2512

Inverter Specifications:

Input battery voltage range: 9 - 16 VDC

Nominal AC output voltage: 120 VAC

Output frequency and accuracy: 60 Hz ± 0.005%

1 msec surge current (amps AC): 100

100 msec surge current (amps AC): 45

5 sec surge power (real watts): 5000

30 sec surge power (real watts): 4500

5 min surge power (real watts): 3500

30 min surge power (real watts): 2900

Continuous power output at 45° C: 2500 VA

Rated input battery current: 239.1 ADC

Inverter efficiency (peak): 91%

Transfer time: 16 msecs

Search mode: .2 ADC

No load (120 VAC output): 0.95 ADC

Waveform: Modified Sine Wave

Charger Specifications:

Continuous output at 45° C: 120 ADC

Charger efficiency: 85%

Power factor: > .95

Input current at rated output: (AC amps) 18

General Features and Capabilities:

Transfer relay capability: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service

Five stage charging capability: Bulk, Absorb, Float, Equalize, and Battery Saver

Battery temperature compensation: With available temp sensor (battery temp 0 – 50° C)

Remote inverter on/off switch: With available pigtail to connect to dry contact

Internal cooling: 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans

Overcurrent protection: Yes, with two overlapping circuits

Overtemperature protection: Yes on transformer, MOSFETS, and battery

Conformal coating on PCB’s for corrosion protection: Yes

Powder coated chassis & top for corrosion protection: Yes

Stainless steel fasteners for corrosion protection: Yes

Dual AC branch rated output breakers: Optional on the ME2012 - AC breakers in 15 or 20 amp ratings

Series stacking interface 120/240 V: Yes

Listings: ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01

Warranty: Three (3) years

Physical Specifications:

Dimensions (h x w x d): 13.75” x 12.65” x 8.0”

Mounting: Shelf (top or bottom up) or bulkhead (vents up)

Weight: 42 lb (19 kg)

Max operating altitude: 15,000’ (4570 m)

Additional Resources:

	Magnum Energy ME2512 User Manual
	Supplement to ME2512 User Manual
	Magnum Energy ME2512 Data Sheet

Back to Magnum Energy Inverters

Back to All Inverters