Installation is easy. Simply connect the inverter’s output to your distribution circuits or electrical panel; connect your shore power cable (AC) to the inverter’s easy to reach terminal block; connect the batteries, and then switch on the power. Using the optional remote control, you can easily operate your inverter from anywhere within your motor coach.

There are two modes of operation associated with an inverter/charger:

Inverter Mode:

Direct current (DC) from the vehicle’s batteries is transformed into alternating current (AC) for use with you household electrical appliances.

Charger Mode:

Alternating current ( AC) is taken directly from shore power (or other AC sources) and passed directly to your household appliances . At the same time, the incoming AC is also converted to DC to recharge the vehicle’s batteries.

Part Number: RD1824

Features:

2 Year Warranty

Shelf, Bulkhead or Upside Down Mounting

Modified Sine Wave Output

Power Factor Corrected Charger (Sine Wave)

RS 485 Communication Port

Remote Port

Flash Programming

ON/OFF Inverter-mounted Switch with LED Indicator

50 Amp Transfer (on Dual I N / Dual OUT Models)

Extra Large AC Access Cover with Terminal Screw Block

360 degree DC Connection Terminals with Covers

Aluminum Cover

Smooth, Aesthetically Pleasing Design

Battery Temperature Sensor - for optimum battery charging (optional)

Specifications:

Input Voltage (nominal): 24 VDC

Input Voltage (range): 21.6 - 31.0 VDC

Power Rating: 1800 Watts

Surge Rating: 3600 Watts

Output Voltage: 120 VAC

Voltage Regulation (max): +/- 5%

Frequency Regulation: 60 Hz +/- .04%

Waveform: modified sine

Forced Air Cooling: variable speed fan

Adjustable Load Sensing: 5 to 100 watts

DC Load Disconnect Sensing: on/off (high/low DC signal)

Remote Control: Optional

Rated Power: 95 Amps

Full Voltage: 0.750 Amps

Search Mode: 0.025 Amps

Short Circuit: 285 Amps

Inverter Efficiency: 94% max.

Charger Efficiency: 85% max.

Charger (power factor): > 0.95

Charge Rate (adjustable): 0-65 Amps

Charging Profiles: liquid lead acid, AGM & GEL

Battery Protection (variable): 10.0 - 11.5 VDC

Four Stage Charging: bulk, absorb, float & Battery Saver TM

Automatic Transfer Relay: 30 amps at 120 VAC

Operating Ambient Temp: - 4°F to + 120°F

Max Altitude (operating): 15,000 feet

Dimensions (H x W x D) : 13.75” x 12.65” x 8”

Mounting: shelf (top or bottom up) or bulkhead

Unit Weight: 38lb (17kg)

Additional Resources:

	Magnum Energy RD1824 User Manual
	Magnum Energy RD1824 Data Sheet

Back to Magnum Energy Inverters

Back to All Inverters