This high efficiency microprocessor controlled DC-AC inverter converts 24 Volts DC (Nominal) to 1000 watts of pure sine-wave AC power at 100/110/120 Volts, 50/60 Hz. The unit comes with in-built 16 Amp transfer switch and a 12 Amp circuit breaker. Input battery cable lugs are provided and the AC output is obtained through hardwire connection. Features include overload, short circuit, over-temperature, under & over voltage protections, low power saving mode to conserve energy. The unit is e-13/ CE / FCC approved and the safety standards of the unit conform to UL-458 specifications.

Part Number: COTEK ST1000-124

Features:

True sine wave output (THD < 3%)

Power ON-OFF remote control

Input & output fully isolation

Load control cooling fan

Advanced microprocessor

Output frequency 50/60 Hz switch selectable

Low power saving mode to conserve energy

Built-in transfer switch and AC circuit breaker

ROF(remote override function) or ignition lockout function option

Speed up transfer time & sync operation with utility AC source

Input polarity reverse / under voltage / over voltage protections

Output short circuit / overload / over temperature protections

Tri-color indicators display input, output level & failure status

e-13 / CE / FCC approved

Specifications:

AC Voltage: 100 / 110 / 120VAC

Continuous Power: 1000W

Surge Power: 2000W

Waveform: True sine wave (THD < 3%)

Frequency: 50 / 60 Hz selectable by DIP switch

AC Regulation: +/- 3%

Standard Receptacles: HARDWIRE

LED Indicator: Input voltage level, output load level and fault status

No Load Current Draw: 0.75A

Stand By Current Draw: 0.15A

DC Voltage: 24VDC

Voltage Range: 21.0~30.0 VDC

Efficiency: 91%

Fuse: 20A x 4

Circuit Breaker: 12 Amps

Synchronous AC Transfer: Yes

Transfer Switch: 16 Amps

Transfer Time: Inverter to utility AC:8~10 msec.; Utility AC to inverter:12~14 msec

Cooling: Loading controlled cooling fan

Remote Control: CR6 / CR8 optional

Battery Low Voltage Alarm: 22VDC

Battery Low Shutdown: 21VDC

Over Load: Shut off output voltage, re-power on to recover

Over Voltage: 30.6 VDC

Over Temp: Shut off output voltage, auto resets

Output Short: Shut off output voltage, re-power on to recover

Battery Polarity Reverse: By Fuse Open

Safety Standards: Meet UL458

Isolation Resistance: I/P ~ O/P: 100M Ohms / 500VDC

EMI Conduction & Radiation: Compliance to FCC class A

Dimensions(L x W x H): 14.7 x 9.29 x 4.53 in

Weight: 13.6 lbs

Additional Resources:

	COTEK ST1000-124 Spec Sheet
	COTEK ST1000-124 User Manual